Black Dektite Square Pipe Flashing - EPDM Flexible Pipe Boots/Flashings

Home > • Dektite Pipe Boot Roof Flashing Products >

Black Dektite Square EPDM Pipe Flashing

Black Dektite Square Flexible Metal Roof Pipe Flashing Boot - Dektite EPDM Pipe Flashing Boot for Metal Roofing Applications

Alternative Views:

See Product Dimensions Below

Discounts apply to any purchase of two (2) +
of this product in course of the same order.

View Discounts In Shopping Cart.

Product Code: BLACK-SQUARE-DEKTITE

Dektite Black Square*:

DFE101B - Fits Pipe 1/4" - 2-1/4" - [$16.85]
DFE102B - Fits Pipe 1/4" - 3" ------ [$17.85]
DFE103B - Fits Pipe 1/4" - 5" ------ [$21.85]
DFE104B - Fits Pipe 3" - 7" --------- [$23.85]
DFE105B - Fits Pipe 4" - 8" --------- [$43.85]
DFE106B - Fits Pipe 5" - 9" --------- [$48.85]
DFE107B - Fits Pipe 6" - 12" ------- [$65.85]
DFE108B - Fits Pipe 6-3/4" - 14" -- [$55.85]
DFE109B - Fits Pipe 9" - 20" ------- [$113.85]

Qty:

Description

Dektite Black Square Pipe Flashing

Rated For Continuous Service Temperature Ranges of -58F to +239F (EPDM)
Easily Customized Pipe Boot on the Job Site Using Heavy Scissors or Shears
EPDM Rubber Boot with Flexible Base (Aluminum Collar) Pipe Flashing
If Trimmed and Installed Correctly The Product Will Not Break or Crack
Reduced Building Maintenance due to Product Longevity -
20 Year Manufacturer Warranty Against Manufacturing Defects
Dektite Base Seals Against Uneven Metal Roofing with Ease.
Fasten Aluminum Collar To Metal Roof With Metal Roofing Screws Every 1-1/2"
Use for Stove Pipes, Chimney, Plumbing, Heating, Air Conditioning, Electrical, Exhaust Vents, etc

Products are recognized by the bsi ISO 9001 Quality Management and the UPC IAPMO Uniform Plumbing Code

Caution! This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Failure to follow the products stated directions and specifications for use may result in damage to the Dektite and other items nearby.

Manufacturers Brochure Available Click Here to View

Installation Fasteners Available: 25 Count Flashing Screw Kit or 35 Count Flashing Screw Kit

BLACK Dektite Square Base Pipe Flashings are for Roof Pitches up to 12/12 or 45. Note: When used on roofs where the pitch is steeper than 20 degrees, or when used on deep ribbed profile roof panels (1-1/2" deep corrugation or more), consider using the next size larger Dektite that will accommodate the same diameter pipe.

Black Square Dektite Fits Pipes Measured by "Outside Diameter" of Pipe
DFE101B - Fits Pipes 1/4' to 2-1/4" with base of 5-1/2" 5-1/2"
DFE102B - Fits Pipes 1/4" to 3" with base of 7" x 7"
DFE103B - Fits Pipes 1/4" to 5" with base of 8-3/4" x 8-3/4"
DFE104B - Fits Pipes 3" to 7" with base of 11" x11"
DFE105B - Fits Pipes 4" to 8" with base of 12-1/4" x 12-1/4"
DFE106B - Fits Pipes 5" to 9" with base of 14-1/4" x 14-1/4"
DFE107B - Fits Pipes 6" to 12" with base of 18" x 18"
DFE108B - Fits Pipes 6-3/4" to 14" with base of 19-1/2" x 19-1/2"
DFE109B - Fits Pipes 9" to 20" with base of 26-3/4" x 26-3/4"

For Contractor Pricing

(View in Cart to See Savings)

Order 2 or More Dektite EPDM Pipe Flashing Boots and Save 10%
Order 10 or More Dektite EPDM Pipe Flashing Boots and Save 25%