Home > • Dektite Pipe Boot Roof Flashing Products >

Black Dektite Round EPDM Pipe Flashing
Black Dektite Round Flexible Metal Roof Pipe Flashing Boot - Dektite EPDM Pipe Flashing Boot for Metal Roofing Applications


 
Alternative Views:


See All Product Dimensions Below

Discounts apply to any purchase of two (2) +
of this product in course of the same order.


View Discounts In Shopping Cart.



Product Code: BLACK-ROUND-EPDM-PIPE-FLASHING


Dektite Black Round EPDM*:
#0 - DF100B EPDM [$14.85]
#1 - DF101B EPDM [$13.85]
#2 - DF102B EPDM [$14.85]
#3 - DF103B EPDM [$16.85]
#4 - DF104B EPDM [$25.85]
#5 - DF105B EPDM [$33.85]
#6 - DF106B EPDM [$37.85]
#7 - DF107B EPDM [$42.85]
#8 - DF108B EPDM [$53.85]

Qty:  
Description
 
Black Dektite Round Standard Flexible Pipe Flashing
  • Continuous Service Temperature Ranges of -58F to +239F (EPDM)
  • Easily Customized Pipe Boot on the Job Site Using Heavy Scissors or Shears
  • Unique Cone Design Provides Continuous Contact With Flashed Pipe Providing Watertight Seal
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar)
  • Dektite Base Seals Against Uneven Metal Roofing, Pipe Flashing Will Not Break or Crack
  • Reduced Building Maintenance due to Product Longevity
  • Flashing Base Fastener Spacing: 1-1/2"
  • Use for Stove Pipes, Chimney, Plumbing, Heating, Air Conditioning, Electrical, Exhaust Vents, etc.
  • 20 Year Manufacturer's Warranty Against Manufacturing Defects
Installation Fasteners Available: 25 Count Flashing Screw Kit or 35 Count Flashing Screw Kit

Recognized by the bsi ISO 9001 Quality Management and UPC IAPMO Uniform Plumbing Code Organizations

Caution! This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Failure to follow the products stated directions and specifications for use may result in damage to the Dektite and other items nearby.

For single wall chimney applications consider using a high temperature silicone flashing product that is rated for higher temperature applications.

On a roof with a 10/12 to 12/12 pitch Dektite recommends you use a Squarebase pipe flashing installed with the tip pointed towards roof top. When used with deep ribbed profile panels (1-1/2" deep corrugation or more), consider using the next size up that will accommodate the same diameter pipe.

Black Round Dektite Fits Pipes Measured by "Outside Diameter" of Pipe
DF100B - Fits Pipes 0" to 1-3/8" with base of 3-3/4"
DF101B - Fits Pipes 1/4" to 2-1/2" with base of 4-3/4"
DF102B - Fits Pipes 1-3/4" to 3-1/4" with base of 6-1/2"
DF103B - Fits Pipes 1/4" to 5" with base of 8"
DF104B - Fits Pipes 3" to 6-1/4" with base of 9-1/2"
DF105B - Fits Pipes 4-1/4" to 7-1/2" with base of 11"
DF106B - Fits Pipes 5" to 9" with base of 12-3/4"
DF107B - Fits Pipes 6" to 11" with base of 14-3/4"
DF108B - Fits Pipes 7" to 13" with base of 16-3/4"

For Contractor Pricing (View in Cart to See Savings)
Order 2 or More Dektite EPDM Pipe Flashing Boots and Save 10%
Order 10 or More Dektite EPDM Pipe Flashing Boots and Save 25%



Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 November 1, 2019
Reviewer: Anonymous Person from Arizona United States  
Order was filled and shipped promptly.  Product worked as advertised.  We could not be more pleased!

Was this review helpful to you?