6" CHAIN LINK ROLLING GATE HARDWARE KIT:
(Chain Link Fence Gate Parts)
(6" Rut Runner, 2 Track Wheels, 6 Track Brackets, 1 Rolo Latch)
ROLLING/SLIDING GATE TRACK BRACKET
- Track bracket for a rolling or a sliding chain link fence gate.
- This one mounts a 1-5/8" pipe track rail to a chain link fence post sizes from 1-5/8 inch to 2-7/8 inch.
- The typical rolling gate track system will require 6 of these track brackets.
- Brackets are manufactured from galvanized steel to prevent rusting
- Use with Track Wheels that mount to 1-5/8" track
- Also use a gate carrier wheel set at the outer end of the gate.
CHAIN LINK ROLLING GATE TRACK ROLLER
- Track wheel rolling sliding gate rear track roller for 2" (1-7/8") gate frame & 1-5/8" track pipe.
- The track wheels are a solid one piece design and are 5-1/4" in diameter heavy duty cast
- These wheels are far superior to the two piece, riveted together, metal half-wheels seen in other kits
Non Adjustable ROLLING GATE 6" WHEEL CARRIER
- This wheel carrier operates a horizontal rolling gate or "sliding gate"
- It works in conjunction with the typical chain link track roller gate system.
- Rolling/Sliding gate carrier wheels for chain link track gate frames from 1-3/8" to 1-7/8"
- Rolling gate rubber wheels are 6" in diameter with a total width of 10" wheel axle length.
- Includes U-bolts to accommodate gate Frames Sizes 1-3/8" thru 1-7/8".
- Manufactured from galvanized steel on gate wheel parts to prevent rusting
- Easy to install gate hardware for new or existing gates.
Chain Link Fence "ROLO" ROLLING GATE LATCH.
Requires two brace bands to attach to the "Latch Post" - purchase brace bands based on the size of your post
- For 1-5/8" & 1-7/8" (2") chain link gate pipe sizes.
- This latch is great for use with rolling chain link gates, sliding gates, and cantilevered rolling gates.
- The ROLO can be padlocked for security