Home > • Construction Wood & Metal Screws > Blue Carbon Steel Concrete Anchor Screws >

Blue Carbon Steel Concrete Anchor Screws 3/16" & 1/4" Diameters (Qty 100)
Blue Carbon Steel Concrete Anchor Screws 3/16" & 1/4" Diameters (Qty 100)


 


Product Code: CONCRETE-ANCHOR-SCREWS


Concrete Anchor Screws*:
3/16" x 1-1/4" Hex [$17.85]
1/4" x 1-1/4" Hex- [$19.85]
1/4" x 1-3/4" Hex- [$19.85]
1/4" x 2/3/4" Hex- [$20.85]

Qty:  
Description
 
Blue Carbon Steel Concrete Anchor Screws - Qty 100
  • Nano Coated Concrete Anchor Screws in 3/16" and 1/4" Diameters
  • 3/16" Screws for General Light to Medium Use for Interior or Exterior Applications
  • 1/4" Screws Are Used for Heavier Load Applications or Where 3/16" Screws Have Difficulties Tapping Into the Material
  • Both Sizes Have Blue Nano Coating For Protection Against Rusting and Corrosion of the Screws
  • Concrete Anchor Screws are ACQ Treated Lumber Compatible
  • Use to Attach Materials i.e. Metal or Wood Strips to Concrete, Concrete Block or Brick
  • Anchor Screws Can be Removed Unlike Expansion Anchors
  • Pre- Drill a Pilot Hole with a 5/32nd carbide tip drill bit for 3/16" Screws install using a 1/4" Hex Head Drive Bit
  • Pre- Drill a Pilot Hole with and use a 3/16" Carbide Bit for the 1/4" Screws install using a 5/16" Hex Head Drive Bit
  • The Hole Should be Drilled 1/4" - 1/2" Deeper Than the Screw Length to Allow for Dust & Debris
  • Remove as Much Debris from the Hole as Possible Using Air, Vacuum or Wire Brush.
  • Do Not Over-Torque Screw to Prevent Stripping the Concrete Hole




Share your knowledge of this product. Be the first to write a review »