ROLLING/SLIDING GATE TRACK BRACKET for 1-5/8" Track Pipe
- Wall mounted Track Brackets for a rolling or a sliding chain link fence gate
- These brackets support a 1-5/8" pipe track.
- The typical rolling gate track system will require 6 of these track brackets.
- Brackets are galvanized steel to prevent rusting
- Use with Track Wheels that mount to 1-5/8" track.
CHAIN LINK ROLLING GATE TRACK ROLLER
- Track Wheel Rolling/Sliding Gate Rear Track Roller for 2" (1-7/8") Gate Frame
- Track wheel is designed to run on a 1-5/8" Track Pipe.
- Track wheel has a curved safety retainer to keep gate on the track
- The Track Wheels are a Solid One Piece design and are about 5-1/4" in diameter
ROLLING GATE 6" WHEEL CARRIER (Non Adjustable)
- This chain link fence gate wheel carrier is an essential part of your rolling chain link fence gate.
- This wheel carrier operates a horizontal rolling gate or "sliding gate".
- It works in conjunction with the typical chain link track roller gate system.
- It is galvanized to last a long time, and easy to install
- Rolling or Sliding Gate Carrier Wheels for Chain Link Track Gate
- Fits gate frames measuring 1-5/8" to 1-7/8".
- Rolling Gate Rubber wheels are 6" in diameter, with a total width of 10" wheel axle length.
- Includes U-bolts to Accommodate Rolling Gate-Sliding Gate Frames Sizes 1-5/8" thru 1-7/8". Galvanized Steel Bracket/Body on Gate Wheel Parts Insures Long Rolling Gate Wheel Bracket Life.
- Easy to Install Chain Link Fence Rolling/Sliding Gate hardware. Gate Wheel for New or Existing Gates.
Chain Link Fence "ROLO" ROLLING GATE LATCH.
- For 1-5/8" & 1-7/8" (2") chain link gate pipe sizes.
- This latch is great for use with rolling chain link gates, sliding gates, and cantilevered rolling gates.
- The ROLO can be padlocked for security