Home > Metal Roofing Screws > #12 Stainless Steel ReGrip Metal Roofing Screws >

12x1-1/2" Stainless Steel Metal Roofing Screws - 250 Quantities
Stainless ReGrip Roofing Screws


 
No Paint/Zinc is in Stock.
Other Listed Items Have Limited Quantities In Stock! Call 406-752-5253 For Availability

Price with Selected Options: $0.00


Product Code: REG-12X1-1-2-STAINLESS-STEEL-

Click to view another SS-12x1-1/2" Metal Roofing Screws

SS-12x1-1/2" Metal Roofing Screws:

Qty:  

  
Description
 
#12 x 1-1/2" Stainless Steel Sheet Metal Roofing Screws

  • Dimensions: .221" Shaft - Diameter - Width s/Washer .625" - Head Height .195" - Use 1/4" Hex Bit
  • Stainless Steel screws have a 1/4 Inch Hex Head and 5/8" EPDM washer to seal screw to roofing panel
  • Screw heads are painted with a two part polyurethane paint for long paint life (Except No Paint)
  • ReGrip Screws are designed to replace screws or nails that have failed or have become loose
  • Stainless Steel screws are ultimate in corrosion resistance in high humidity and salt water areas
ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength

#12 x 1-1/2 Stainless Steel: Sheet Metal Roofing Screws
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended

Needing a 1/4" Hex Head Drill Bit? Available Here - Follow the Link

Installation Instructions Available Here - Follow the Link

Additional Color Matches by Manufacturer Available Here - Follow the Link
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.


For Contractor Pricing (View in Cart to See Savings)
Order 3 or more Metal Roofing/Siding Screws or other Bulk Metal Screws - Save 8%
Order 10 or more Metal Roofing/Siding Screws or other Bulk Metal Screws - Save 12%

Share your knowledge of this product. Be the first to write a review »