6" CHAIN LINK ROLLING GATE HARDWARE KIT:


ROLLING GATE KIT/SLIDING GATE TRACK BRACKET

• Track bracket for a rolling or a sliding chain link fence gate.
• This one mounts a 1-5/8" pipe track rail to a chain link fence post sizes from 1-5/8 inch to 2-7/8 inch.
• The typical rolling gate kit track system will require 6 of these track brackets.
• Brackets are manufactured from galvanized steel to prevent rusting
• Use with Track Wheels that mount to 1-5/8" track
• Also use a gate carrier wheel set at the outer end of the gate.

CHAIN LINK ROLLING GATE TRACK ROLLER

• Track wheel rolling sliding gate rear track roller for 2" (1-7/8") gate frame & 1-5/8" track pipe.
• The track wheels are a solid one piece design and are 5-1/4" in diameter heavy duty cast
• These wheels are far superior to the two piece, riveted together, metal half-wheels seen in other kits

Non Adjustable ROLLING GATE 6" WHEEL CARRIER

• This wheel carrier operates a horizontal rolling gate or "sliding gate"
• It works in conjunction with the typical chain link track roller gate system.
• Rolling/Sliding gate carrier wheels for chain link track gate frames from 1-3/8" to 1-7/8"
• Rolling gate rubber wheels are 6" in diameter with a total width of 10" wheel axle length.
• Includes U-bolts to accommodate gate Frames Sizes 1-3/8" thru 1-7/8".
• Manufactured from galvanized steel on gate wheel parts to prevent rusting
• Easy to install gate hardware for new or existing gates.