 |
Red Dektite Square Base High Temperature Silicone Flexible Pipe Flashings
- Easily Customized Pipe Boot on the Job Site using heavy scissors or shears
- Red Silicone Pipe Boot with Flexible Base (Aluminum Collar)
- Dektite Base Seals Against Uneven Metal Roofing with Ease, Pipe Flashing Will Not Break or Crack
- Continuous Service Temperature Ranges of -58˚F to +392˚ F
- Reduced Building Maintenance due to product longevity
- Flashing Base Fastener Spacing: 1-1/2"
- Use for Stove Pipes, Chimney Pipes, Plumbing Pipes, Heating Pipes, Air Conditioning Pipes, Electrical Conduits, Exhaust Vent Pipes, etc.
- 20 Year Manufacturer's Warranty Against Manufacturing Defects
- Products are recognized by the bsi ISO 9001 Quality Management and the UPC IAPMO Uniform Plumbing Code
Manufacturers recommended temperature ranges are clearly stated! Please verify this product will meet specifications of your installation or possible product and structural damage may occur
Manufacturers Brochure Available Click Here to View
Installation Fasteners Available: 25 Count Flashing Screw Kit or 35 Count Flashing Screw Kit
Dektite Recommends when installing flashing on deep ribbed roofing with 1-1/2” and larger corrugation and/or on a roof with a 10/12 to 12/12 pitch (or both) to use the next larger sized product that will accommodate the same diameter pipe. Dektite also recommends you install the square base pipe flashing with the tip pointed towards roof top (diamond).
Each pipe boot will fit several different sizes of pipe measured by "Outside Diameter" of pipe. Dektite #1 (DFE201RE) -- Fits 1/4" to 2-1/4" Pipe Diameter - with base of 5-1/2" x 5-1/2" Dektite #2 (DFE202RE) -- Fits 1/4" to 3" Pipe Diameter - with base of 7" x 7" Dektite #3 (DFE203RE) -- Fits 1/4" to 5" Pipe Diameter - with base of 8-3/4" x 8-3/4" Dektite #4 (DFE204RE) -- Fits 3" to 7" Pipe Diameter - with base of 11" x 11" Dektite #5 (DFE205RE) -- Fits 4" to 8" Pipe Diameter - with base of 12-1/4" x 12-1/4" Dektite #6 (DFE206RE) -- Fits 5" to 9" Pipe Diameter - with base of 14-1/4" x 14-1/4" Dektite #7 (DFE207RE) -- Fits 6" to 12" Pipe Diameter - with base of 18" x 18" Dektite #8 (DFE208RE) -- Fits 6-3/4" to 14" Pipe Diameter - with base of 19-1/2" x 19-1/2" Dektite #9 (DFE209RE) -- Fits 9" to 20" Pipe Diameter - with base of 26-3/4" x 26-3/4"
For Contractor Pricing (View in Cart to See Savings)
- Order 2 or More Dektite High Temp Pipe Flashing Boots and Save 10%
- Order 10 or More Dektite High Temp Pipe Flashing Boots and Save 25%
|
|
 |