Dektite Pipe Flashing Square Base Combo High Temperature - Silicone Flexible Pipe Boots/Flashings - Dektite Roof Flashing

Home > • Dektite Pipe Boot Roof Flashing Products >

Red Dektite Square Base Combo/Retrofit High Temperature Silicone

Dektite Flexible High Temperature Metal Roof Pipe Square Flashing Boot - Dektite Square Silicone Pipe Flashing Boot for Metal Roofing Applications

Alternative Views:

See Product Dimensions Below

Discounts apply to any purchase of two (2) +
of this product in course of the same order.

View Discounts In Shopping Cart.

Product Code: RED-SQUARE-COMBO

Red Combo Silicone*:

#1 DC201REC Combo [$21.85]
#2 DC202REC Combo [$22.85]
#3 DC203REC Combo [$34.85]
#4 DC204REC Combo [$38.85]
#5 DC205REC Combo [$55.85]
#6 DC206REC Combo [$62.85]
#7 DC207REC Combo [$75.85]
#8 DC208REC Combo [$98.85]

Qty:

Description

Dektite High Temperature Combo/Retrofit Square Base Pipe Flashing

This Dektite Product is Unique in Design. Manufactured to fit Standard Pipe or Installed as a Retrofit Boot
Where the Height of Pipe is Hard to Reach or Blocked by Object Cut Along Seam and Reseal With Provided Clips.
Rated for High Temperature with Continuous Service Temperature Ranges of -58F to +392F Red Silicone
Silicone Rubber with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing,
If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
Install Fasteners into the Aluminum Collar every 1-1/2" to Assure Proper Sealing
Use for Stove Pipes, Chimney, Plumbing, Heating, Air Conditioning, Electrical, Exhaust Vents.
Product Comes With a 20 Year Manufacturer's Warranty Against Manufacturing Defects
Easily Customized on Site using Heavy Scissors or Shears.
Products are recognized by the bsi ISO 9001 Quality Management and the UPC IAPMO Uniform Plumbing Code

Manufacturers recommended temperature ranges are clearly stated! Please verify this product will meet specifications of your installation or possible product and structural damage may occur

Fasteners Available Here: 25 Count Flashing Screw Kit or 35 Count Flashing Screw Kit

Dektite Recommends when installing flashing on deep ribbed roofing with 1-1/2” and larger corrugation and/or on a roof with a 10/12 to 12/12 pitch (or both) to use the next larger sized product that will accommodate the same diameter pipe. Dektite also recommends you install the square base pipe flashing with the tip pointed towards roof top (diamond).

Each pipe boot will fit several different sizes of pipe measured by "Outside Diameter" of pipe.

DC201REC pipe boot fits pipes from 1/4" to 2-1/2" - With a base of 5-1/2" x 5-1/2"
DC202REC pipe boot fits pipes from 1-3/4" to 3-1/4" - With a base of 7" x 7"
DC203REC pipe boot fits pipes from 1/4" to 5" - With a base size of 8-3/4" x 8-3/4"
DC204REC pipe boot fits pipes from 3" to 7" - With a base size of 11-1/4" x 11-1/4"
DC205REC pipe boot fits pipes from 4-1/4" to 7-1/2" - With a base size of 14-1/4" x 14-1/4"
DC206REC pipe boot fits pipes from 5" to 9" - With a base size of 14-1/4" x 14-1/4"
DC207REC pipe boot fits pipes from 6' to 11" - With a base size of 17-3/4" x 17-3/4"
DC208REC pipe boot fits pipes from 7" to 13" - With a base size of 17-3/4" x 17-3/4"

For Contractor Pricing (View in Cart to See Savings)

Order 2 or More Dektite High Temp Pipe Flashing Boots and Save 10%
Order 10 or More Dektite High Temp Pipe Flashing Boots and Save 25%