 |
RED Round High Temp Silicone Flexible Pipe Flashing
- Continuous Service High Temperature Ranges of -58F to 392F (Silicone)
-
Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
-
Silicone Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
-
Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2" **
-
If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
-
Reduces Building Maintenance Due To The Long Life of the Dektite Product
-
Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
-
20 Year Manufacturer's Warranty Against Manufacturing Defects
On a Roof with a 10/12 to 12/12 Pitch Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top.
When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe.
Caution: Manufacturers Recommended Temperature Ranges Are Clearly Stated! Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May Occur
Installation Instructions Available here Follow the Link
** For Dektite Products Up To the Number 8 Size a 50 Count Bag of Roofing Screws Should Be Sufficient - Click on the Link Here
Product Dimension Chart
Name
|
Pipe Diameter
|
Base Size
|
DF201RE
|
1/4" to 2-1/2โ
|
4-3/4โ
|
DF202RE
|
1-3/4โ to 3-1/4โ
|
7-3/4โ
|
DF203RE
|
1/4" to 5"
|
7-3/4โ
|
DF204RE
|
3" to 6-1/4โ
|
9-1/2โ
|
DF205RE
|
4" to 7โ
|
10-3/4โ
|
DF206RE
|
5" to 9"
|
12-1/2โ
|
DF207RE
|
6" to 11โ
|
14-1/2โ
|
DF208RE
|
7โ to 13โ
|
16-1/2"
|
DF209RE
|
10" to 19"
|
25-1/2"
|
For Contractor Pricing (View in Cart to See Savings)
Order 2 or More Dektite High Temp Pipe Flashing Boots and
Save 10% Order 10 or More Dektite High Temp Pipe Flashing Boots and Save 25%
|
|
 |