Dektite Pipe Flashing #3 - EPDM Flexible Pipe Boots/Flashings - Dektite Roof Flashing - Gray Pipe Flashing - DF101G, DF102G, DF103G, DF104G, DF105G, DF106G, DF107G, DF108G, DF109G

Gray Dektite Standard Round Base EPDM Flexible Pipe Boot Jack Flashings

Continuous Service Temperature Ranges of -58˚F to +239˚ F (EPDM)
Easily Customized Pipe Boot on the Job Site using Heavy Scissors or Shears
EPDM Rubber Boot with Flexible Base (Aluminum Collar)
Dektite Base Seals Against Uneven Metal Roofing with Ease, Pipe Flashing Will Not Break or Crack
Reduced Building Maintenance due to Product Longevity
Flashing Base Fastener Spacing: 1-1/2"
Use for Stove Pipes, Chimney, Plumbing, Heating, Air Conditioning, Electrical, Exhaust Vents, etc.
20 Year Manufacturer's Warranty against Manufacturing Defects
Products are recognized by the bsi ISO 9001 Quality Management and the UPC IAPMO Uniform Plumbing Code

Caution! This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Failure to follow the products stated directions and specifications for use may result in damage to the Dektite and other items nearby.

For single wall chimney applications consider using a high temperature silicone flashing product that is rated for higher temperature applications.

Manufacturers Brochure Available Here

Installation Fasteners Available 25 Count Flashing Screw Kit or 35 Count Flashing Screw Kit

On a roof with a 10/12 to 12/12 pitch Dektite recommends you use a Square base pipe flashing installed with the tip pointed towards roof top. When used with deep ribbed profile panels (1-1/2" deep corrugation or more), consider using the next size up that will accommodate the same diameter pipe.

Each pipe boot will fit several different sizes of pipe measured by "Outside Diameter" of pipe.

Dektite #0 (DF100G) -- Fits 0" to 1-3/8" Pipe - with base size of 3-3/4" diameter
Dektite #1 (DF101G) -- Fits 1/4" to 2-1/2" Pipe - with base size of 4-3/4" diameter
Dektite #2 (DF102G) -- Fits 1-3/4" to 3-1/4" Pipe - with base size of 6-1/2" diameter
Dektite #3 (DF103G) -- Fits2 -1/4" to 5" Pipe - with base size of 8" diameter
Dektite #4 (DF104G) -- Fits 3" to 6-1/4" Pipe - with base size of 9-1/2" diameter
Dektite #5 (DF105G) -- Fits 4-1/4" to 7-1/2" Pipe - with base size of 11" diameter
Dektite #6 (DF106G) -- Fits 5" to 9" Pipe - with base size of 12-3/4" diameter
Dektite #7 (DF107G) -- Fits 6" to 11" Pipe - with base size of 14-3/4" diameter
Dektite #8 (DF108G) -- Fits 7" to 13" Pipe - with base size of 16-3/4" diameter
Dektite #9 (DF109G) -- Fits 10" to 19" Pipe - with base size of 25-1/2" diameter

For Contractor Pricing (View in Cart to See Savings)

Order 2 or More Round Base Dektite Pipe Flashing Boots and Save 10%
Order 10 or More Round Dektite Pipe Flashing Boots and Save 25%

COMPANY

ACCOUNT

SHOPPING