Galvanized Chain Link Rolling Gate Track Roller
Track Wheel Rolling/Sliding Gate * *
** We highly recommend you do not use tubing.
- Rear track roller for 2" (1-7/8") Gate Frame & 1-5/8" Track Pipe.
- These track wheels are a solid one piece design and are 5-1/4" in diameter of heavy duty cast
- This style is sturdier than the typical split, two-piece style seen offered by other vendors!
- These are the safety track wheel type with a curved retainer to keep gate on track.
- Track Wheel fits a 1-5/8" Track Pipe and a 1-7/8" Chain Link Fence Gate Frame.
- Use Schedule 20 1-5/8" outside diameter pipe (we recommend schedule 40) for the roller to roll on. **
- Frame and pipe measurements are "outside diameters" - measure yours prior to ordering to ensure you receive correct item
- These rollers are commercial and industrial strength
- They come with a manufacturer's limited lifetime warranty
- Each rolling chain link gate will require 2 of these Track Wheels, 6 track brackets, and a wheel carrier for the outer end of the gate.
For Contractor Pricing (View in Cart to See Savings)
- Order 4 or more Single Rolling Gate Track Gate Wheels - Save 8%
- Order 20 or more Single Rolling Gate Track Gate Wheels - Save 15%
- Order (2) 2 PACKS or More Rolling Gate Track Gate Wheels and Save 8%
- Order (10) 2 PACKS or More Rolling Gate Track Gate Wheels and Save 15%