Home > Metal Roofing Screws > #14 Stitch Tek Metal Panel and Roofing Screws >

#14 x 7/8" Stitch Tek Metal To Metal Type #1 Roofing Screws
14 x 7/8 Colored Stitch Tek Metal to Metal Screws


 
Alternative Views:


Quantity Discounts Apply to this Product. Click on “View Quantity Discounts” Below

Price with Selected Options: $0.00


Availability:: Usually Ships in 24 Hours
Product Code: 14-7-8-STITCH-TEK-ROOFING

Click to view another Special Order #14 Stitch Tek #1

Special Order #14 Stitch Tek #1*:


Qty:  

  
Description
 
#14 GALVANIZED/ZINC 7/8 Inch Long Metal to Metal Type #1 STITCH TEK Roofing Screws

  • 5/16" hex head with ~9/16" EPDM washer - Shaft is .242" (#14) - Length 7/8"
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc)
  • The #14 x 7/8" Screw is used to attach metal panels together along with several other uses
  • These screws have a self drilling tip, no unnecessary pre-drilling needed to install
  • Also Used for attaching corner and rake trims and the ridge cap where they overlap wall steel

Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

#14 GALVANIZED/ZINC 7/8 Inch Long Metal to Metal Type #1 STITCH TEK Roofing Screws
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

Installation Instructions Available Here - Follow the Link

Additional Color Matches by Manufacturer Available Here - Follow the Link

Needing a 5/16" Hex Head Drill Bit? Available Here - Follow the Link

For Contractor Pricing (View in Cart to See Savings)
Order 3 or more Metal Roofing/Siding Screws or other Bulk Metal Screws - Save 8%
Order 10 or more Metal Roofing/Siding Screws or other Bulk Metal Screws - Save 12%

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Fasteners December 30, 2021
Reviewer: Kenneth Hunt from MARANA, AZ United States  
I was looking for a certain size fastener and here is where I found them.  Exactly what I needed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 I received my order earlier than stated. November 10, 2021
Reviewer: Timothy Galore from Verona, PA United States  
Order was exactly as I ordered and very well made, I would definetly place future orders with Jake Sales keep up the great work !!!!!!!!!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Screws October 23, 2021
Reviewer: Glen Alexander from Williston, ND United States  
The screws I ordered came in exactly as ordered and arrived on the exact day as promised. I appreciate the promptness.  I will definitely  be ordering from you again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Roofing Screws/Metal to Metal June 1, 2021
Reviewer: MICHAEL PHILLIPS from GRAND BAY, AL United States  
Ordered these screws before hand so that when I get to the point of putting on my ridge cap, I'd have them. Decided I'd try a few of them on my rake/gable trim &  they work great. It's product's like these that I count on to get my roof metal put on right. 👍

Was this review helpful to you?