#14 x 7/8" Special Order Self-Drilling Stitch Tek Screws

Home > Metal Roofing Screws > #14 Stitch Tek Metal Panel and Roofing Screws >

Special Order #14 x 7/8" Stitch Tek Metal To Metal Type #1 Roofing Screws

Alternative Views:

These Screws are Special Order Products. All Purchases are Final - No Cancellations Once Order is Placed
No Refunds - Please Call For Current Shipping Times (406) 752-5253 -

Quantity Discounts Apply to this Product. Click on “View Quantity Discounts” Below

Price with Selected Options: $0.00

notimer

Availability:: Usually Ships in 1 to 2 Weeks
Product Code: 14-7-8-SPECIAL-ORDER-STITCH

		Click to view another Special Order #14 Stitch Tek #1
Special Order #14 Stitch Tek #1*:

Qty:

Description

#14 GALVANIZED/ZINC 7/8 Inch Long Metal to Metal Type #1 STITCH TEK Roofing Screws

5/16" hex head with ~9/16" EPDM washer - Shaft is .242" (#14) - Length 7/8"
Metal Screws are painted to closely match many brands of metal roofing though color may vary
Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc)
The #14 x 7/8" Screw is used to attach metal panels together along with several other uses
These screws have a self drilling tip, means no unnecessary pre-drilling needed to install
Also Used for attaching corner and rake trims and the ridge cap where they overlap wall steel

Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

#14 GALVANIZED/ZINC 7/8 Inch Long Metal to Metal Type #1 STITCH TEK Roofing Screws
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

Installation Instructions Available Here - Follow the Link

Additional Color Matches by Manufacturer Available Here - Follow the Link

Needing a 5/16" Hex Head Drill Bit? Available Here - Follow the Link

For Contractor Pricing (View in Cart to See Savings)
Order 3 or more Metal Roofing/Siding Screws or other Bulk Metal Screws - Save 8%
Order 10 or more Metal Roofing/Siding Screws or other Bulk Metal Screws - Save 12%