 |
#14 CTX Construction Lag Star Drive Screws
- These Screws are Manufactured from High Quality Heat Treated Steel are Tripled Coated and ACQ Treated Lumber Compatible
- Exterior Coated Screws are Corrosion Resistant Having Passed the 1200 Hour Salt Spray Test Without Coating Failures
- 1/4" Construction Lag Screw Thread Diameter, 1/2" Head Diameter Modified Truss Head Screw for Better Compression Forces
- These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces and Ease of Installation
- Deep, Wide, Sharp Screw Threads for Maximum Holding Power, Excellent for Hard and Soft Wood
- Knurled Screw Shoulder Lowers Drill Torque Requirements, Screw Threads Cut Cleanly and Easily Through Tough Materials
- Type 17 Notched Extra Sharp Wood Screw Point for Quick Starts without "Walking" and Need for Pre-Drilling in Hard Woods
- Deep Torx/Star Drive Head Depth Reduces "Cam-out" When Driving Screws
- Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame or Post and Beam
** Change in Manufacturing: The #14 x 1-1/2" and #14 x 2-1/2" have slightly different features. Threads have "V" notches to assist in making installation easier. Cutting nibs under the head for self-countersinking. Bronze coating is still ACQ lumber compatible but may look different than other #14 CTX screws we offer. Dimensions: Head width .547" - Head Height .14" - Shank diameter .25" (#14) -
High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX"
#14 Torx/Star Drive Screws Uses T25 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard and Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations and Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed and Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
Screw Engineering Specs:
Average Shear Strength of #14 Shank --- 2171 lbs
Average Pull-Out Strength ----------------- 1472 lbs
(Screw Pull-Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
For Contractor Pricing (View Cart to See Discounts)
Order 2 or More 100 Count CTX Wood Screws Save 10%
Order 6 or More More 100 Count CTX Wood Screws Save 25%
Full Box Only
Order 2 or more Bulk Box CTX Wood Screws Save 5%
Order 6 or more Bulk Box CTX Wood Screws Save 10%
Order 24 (1/2 Pallet) or more Bulk Box CTX Wood Screws Save 15%
Order 48 (Full Pallet) or more Bulk Box CTX Wood Screws Save 20%
Truckload Quantity Discounts: 30% off: More Information
|
|
|
Great 👠
