#12 Metal Roofing ReGrip Screws

Home > Metal Roofing Screws > #12 ReGrip Metal Roofing Screws >

#12 x 2" Metal Roofing Screws - ReGrip Qty 250

#12 Metal ReGrip Roofing Screw - Galvanized

Alternative Views:

Brown Color Screws Temporarily Have a 5/16" Hex Head and a ~9/16" EPDM Washer

More colors available in the #12 x 2" Special Order Category. Just follow this link

Quantity Discounts Apply to this Product. Click on "View Quantity Discounts" Below

Price with Selected Options: $0.00

Availability:: Usually Ships in 24 Hours
Product Code: 12-2-GALVANIZED-REGRIP

		Click to view another 12.5 Color
12.5 Color*:

Qty:

Description

#12 x 2 inch Sheet Metal Roofing Screws 250 Count

1/4" Hex Head - ~5/8" EPDM washer - .219" Shaft (#12) Width .625" - Length 2"
ReGrip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
These screws should be used when replacing smaller nails or screws in roofing or siding projects
Colored screws are polyurethane coated, closely match roofing manufacturers colors (Not Zinc)

Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing due to age may vary to some degree

Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw

ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength.

#12 x 2 inch Sheet Metal Roofing Screws 250 Count
All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Additional Color Matches by Manufacturer Available Here - Follow the Link

Needing a 1/4" Hex Head Drill Bit? Available Here - Follow the Link

Installation Instructions

For Contractor Pricing(View in Cart to See Savings)

Order 3 or more Metal Roofing/Siding Screws-Save8%

Order 10 or more Metal Roofing/Siding Screws-Save12%