 |
SELF DRILLING WAFER HEAD SCREW #10-16 X 1-1/4" for WOOD-TO-METAL.
- Wafer Comes In Bronze Coating And Are Corrosion and Rust Resistant. ACQ Lumber Compatible
-
Self Drilling - Engineered for Applications where Wood is Being Fastened to Steel or Aluminum
-
Resistant to Corrosion and Rust -Screws Passed 1200 Hours of Salt Spray Tests without Screw Failures
-
Torx/Star Drive delivers twice the torque of Phillips or square drive screws with less slippage
-
Manufactured from high quality heat treated steel, screw will drill, tap and secure in one operation
WOOD-TO-METAL SELF DRILLING WAFER HEAD SCREW This screw is #10-16 X 1-1/4" long, a head diameter is about 7/16" and thread length of ~7/8". Install these screws using a T25 Torx/Star drive bit. Wafer Screws with the drill point tip - will drill, tap, and secure in one operation.
For Contractor Pricing (View Cart to See Discounts) Order 2 or More 1 Pound Self Drilling Wafer Head Screws or other Screws Save 15% Order 6 of More 1 Pound Self Drilling Wafer Head Screws or other Screws Save 25%
Order 2 or More 5 Pound Self Drilling Tek Screws or other Screws Save 10% Order 6 of More 5 Pound Self Drilling Tek Screws or other Screws Save 20%
Order 2 or more Wood to Steel Tek Screws or other Bulk Screw Boxes and Save 5% Order 6 or more Wood to Steel Tek Screws or other Bulk Screw Boxes and Save 10%
|
|
 |