Home > • Screw Bits, Drivers, Holders & Adapters > Magnetic Nut Drivers >

Single Magnetic Nut Drivers w/Quick Change Shank
1/4 inch Magnetic Nut Driver w/Quick Change Shank - Standard 1/4 inch Drive

Alternative Views:

Discounts apply to any purchase of five (5) +
of this product in course of the same order.

View Discounts In Shopping Cart.


Magnetic Nut Drivers*:
1/4" x 1-3/4" -- [$7.85]
5/16" x 1-3/4" - [$7.85]
3/8" x 1-3/4" -- [$7.85]
7/16" x 1-3/4" - [$8.85]
1/2" x 1-3/4" -- [$8.85]

Single Item Purchase - Magnetic Nut Drivers
  • 1/4 inch Standard Shank Fits Securely in Standard Drill Chucks
  • Nut Drivers Come in 1/4, 5/16, 3/8, 7/16, & 1/2 inch sizes
  • These magnetic nut drivers are made from industrial-grade, hardened and tempered tool-steel
  • Professional Grade Drill Drive Bit Tips, These Nut Drivers Resist Stripping and Cam-Out
  • For Professional Operations & Demanding Industries
  • Uses Include Driving Some Heavy Duty Hex-Head Screws, Nut, Bolts
  • 1-3/4 inch Overall Length
For Contractor Pricing (View in Cart to See Savings)
  • Order 5 or More Magnetic Nut Driver or other Nut Drivers and Save 50%

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Best 1/4" magnetic nut driver for roofing screws December 17, 2014
Reviewer: Ryan Eckley from United States  
There's nothing like dropping screw after screw off the roof when you have a crumby driver... I used a few different 1/4 magnetic nut drivers to put in roofing screws before I got ahold of this one from Jake Sales.  With this one it does not matter if you are using self starting screws or not, time after time you can punch them in and this nut driver holds on to the head while you start them.  No more holding on to every screw just to get it started... even while leaning over and putting on the end facia pieces from the top.  This nut driver is just the right depth, the others were too shallow and allowed the head to wobble.

Was this review helpful to you?