12 x 1-1/2" Metal Roofing Screw: (250) Hex ReGrip Sheet Metal Roof Screw. Sharp Point metal to wood siding screws. 5/8" EPDM washer.

Be Aware the EVERGREEN Screw Has a 5/16" Head 9/16" Washer

✔ 1/4" Hex Head - ~5/8" EPDM washer - .219" Shaft (#12) Width .625" - Length 1-1/2" Under Head to Tip
✔ ReGrip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
✔ These screws should be used when replacing smaller nails or screws in roofing or siding projects
✔ Colored screws are polyurethane coated, closely match roofing manufacturers colors (color may vary)
✔ Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
✔ Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
✔ Use on any metal roofing or siding project where 1-1/2 inch roofing screws are needed
✔ Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing


All our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)

Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.

Installation Instructions   Available Here

Additional Color Matches by Manufacturer  Available Here