DEKTITE RED Square Base High Temp Silicone - Flexible Pipe Flashing Boot - Dektite pipe flashing
DEKTITE RED Square Base High Temp Silicone - Flexible Pipe Flashing Boot - Dektite pipe flashing
Regular price
$19.99
RETAIL PRICE
Regular price
$15.85 USD
Regular price
Sale price
$15.85 USD
Unit price
per
RETAIL PRICE
Regular price
$19.99
Couldn't load pickup availability
In-Stock Orders Will Ship Within
Hours
Minutes
Seconds
DEKTITE RED Square Base High Temp Silicone - Flexible Pipe Flashing Boot - Dektite pipe flashing
✔ Continuous Service High Temperature Ranges of -58F to 392F (Silicone)
✔ Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔ Silicone Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
✔ Slide Flashing Down Pipe and Fasten Aluminum Collar to Roof with Metal Roofing Screws Every 1-1/2"
✔ If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔ Reduces Building Maintenance Due to Long Life of Dektite Product
✔ Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
✔ 20 Year Manufacturer's Warranty Against Manufacturing Defects
Works with Metal Roof Pitches up to 12/12 (0 to 45 degrees)
On a Roof with a 10/12 to 12/12 Pitch (45 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
Manufacturers recommended temperature ranges are clearly stated Please verify this product will meet specifications of your installation or possible product damage may occur
Installation Instructions Available Here
50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation Available Here
✔ Continuous Service High Temperature Ranges of -58F to 392F (Silicone)
✔ Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔ Silicone Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
✔ Slide Flashing Down Pipe and Fasten Aluminum Collar to Roof with Metal Roofing Screws Every 1-1/2"
✔ If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
✔ Reduces Building Maintenance Due to Long Life of Dektite Product
✔ Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
✔ 20 Year Manufacturer's Warranty Against Manufacturing Defects
Works with Metal Roof Pitches up to 12/12 (0 to 45 degrees)
On a Roof with a 10/12 to 12/12 Pitch (45 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
Manufacturers recommended temperature ranges are clearly stated Please verify this product will meet specifications of your installation or possible product damage may occur
Installation Instructions Available Here
50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation Available Here
| Product Number | Fits Pipe Outside Diameter | Base Size Diameter | Temperature Range | Flashing Material |
|---|---|---|---|---|
| DFE200RE | 0" to 1-1/2" | 4" x 4" | -58F to 392F | Silicone |
| DFE201RE | 1/4" to 2-1/4" | 5-1/2" X 5-1/2" | -58F to 392F | Silicone |
| DFE202RE | 1/4" to 3" | 7" X 7" | -58F to 392F | Silicone |
| DFE203RE | 1/4" to 5" | 8-3/4" X 8-3/4" | -58F to 392F | Silicone |
| DFE204RE | 3" to 7" | 11" X 11" | -58F to 392F | Silicone |
| DFE205RE | 4" to 8" | 12-1/4" X 12-1/4" | -58F to 392F | Silicone |
| DFE206RE | 5" to 9" | 14-1/4" X 14-1/4" | -58F to 392F | Silicone |
| DFE207RE | 6" to 12" | 18" X 18" | -58F to 392F | Silicone |
| DFE208RE | 6-3/4" to 14" | 19-1/2" X 19-1/2" | -58F to 392F | Silicone |
| DFE209RE | 9" to 20" | 26-3/4" X 26-3/4" | -58F to 392F | Silicone |
