Dektite ROUND Black EPDM flexible Pipe Flashing, Roof Jack, Pipe Booting Flashing
Dektite ROUND Black EPDM flexible Pipe Flashing, Roof Jack, Pipe Booting Flashing
Regular price
$23.99
RETAIL PRICE
Regular price
$18.85 USD
Regular price
Sale price
$18.85 USD
Unit price
per
RETAIL PRICE
Regular price
$23.99
Couldn't load pickup availability
In-Stock Orders Will Ship Within
Hours
Minutes
Seconds
Customer Reviews
Based on 10 reviews
Write a review
Dektite ROUND Black EPDM flexible Pipe Flashing, Roof Jack, Pipe Booting Flashing
✔ Rated For Continuous Service Temperature Ranges of -58F to 239F (EPDM)
✔ Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔ EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
✔ Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
✔ 20 Year Manufacturer's Warranty Against Manufacturing Defects
✔ If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
On a Roof with a 10/12 to 12/12 Pitch Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top
When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe.
Caution: This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated. Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May Occur
For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications
50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation Available Here
Installation Instruction Available Here
✔ Rated For Continuous Service Temperature Ranges of -58F to 239F (EPDM)
✔ Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
✔ EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
✔ Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
✔ 20 Year Manufacturer's Warranty Against Manufacturing Defects
✔ If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
On a Roof with a 10/12 to 12/12 Pitch Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top
When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe.
Caution: This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated. Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May Occur
For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications
50 Count #10x1-1/2" Metal Roofing Screws for Dektite Installation Available Here
Installation Instruction Available Here
| Product Number | Fits Pipe Outside Diameter | Base Size Diameter | Temperature Range | Flashing Material |
|---|---|---|---|---|
| DF100B | 0" to 1-3/8" | 3-3/4" | -58F to 239F | EPDM |
| DF101B | 1/4" to 2-1/2" | 4-3/4" | -58F to 239F | EPDM |
| DF102B | 1-3/4" to 3-1/4" | 6-1/2" | -58F to 239F | EPDM |
| DF103B | 1/4" to 5" | 8" | -58F to 239F | EPDM |
| DF104B | 3" to 6-1/4" | 9-1/2" | -58F to 239F | EPDM |
| DF105B | 4-1/4" to 7-1/2" | 11" | -58F to 239F | EPDM |
| DF106B | 5" to 9" | 12-3/4" | -58F to 239F | EPDM |
| DF107B | 6" to 11" | 14-3/4" | -58F to 239F | EPDM |
| DF108B | 7" to 13" | 16-3/4" | -58F to 239F | EPDM |
| DF109B | 10 to 19" | 25-1/2" | -58F to 239F | EPDM |
